Solidator White Resin (R051)

The resin in white color is especially suitable for architectural models.


It offers high impact strength, low warpage and high dimensional stability. This also allows the use as functional components.


3d printed architecure

Material Data:

Characteristic Method Symbol R051
White
Applications Models, Architecture, Art
Physical Properties   
Hardness Shore D DIN EN ISO 48-4 D 80,2
Solid Density DIN EN ISO 1183-1 ρ 1.21 g/cm³
Tensile properties   
Tensile Modulus ASTM D638, Type I Et -
Tensile Strength ASTM D638, Type I σM 33.0 MPa
Elongation at Tensile Strength ASTM D638, Type I εM -
Elongation at Break ASTM D638, Type I εtB -
Bending properties   
Flexural Modulus ASTM D790 Ef -
Flexural Strength ASTM D790 σfM -
Deflection at Flexural Strength ASTM D790 εfM -
Deflection at Break ASTM D790 εfB >5%
Impact Strength Properties   
IZOD Notched ASTM D256 aiN -
Thermal Properties   
HDT @ 0.45 N/mm² ASTM D 648 (B) Tf -
Glow wire flammability index DIN EN 60695-2-12 GWFI -
Glass Transition Temperature DIN EN ISO 11359 Tg -
Linear Expansion Coeff.  -20°C … 20°C DIN EN ISO 11359 α -
Linear Expansion Coeff.  65°C … 80°C DIN EN ISO 11359 α -
Curl / Vertical Distortion   
Dimensional Accuracy XY Test Print (100x100x6mm) 99,71%
Curl on Test bar (200x20x5mm) Vertical Print Orientation 0mm
Curl on Cantilever Test bar (200x20x5mm) Horizontal Print Orientation 0.05 mm
Printing Speed   
Print Speed (cm³/hour) 1702
Conditions: Printed on Solidator V3, Layer Height 100 micron, Cleaned in Isopropanol < 3 min, Air Brush Clean, Post Cure with Solidator Cure Box