Professional Translucent Orange (R001)

The resin “Solidator Professional Translucent Orange” has high scratch-resistance, high bending resistance good tensile strength and high heat deflection temperature.

Ideal for mold-making and prototyping of small to medium sized objects.

3d printed prototyps

Material Data:

Characteristic Method Symbol R001
Translucent Orange
Applications Prototyping, Molds
Physical Properties  
Hardness Shore D DIN EN ISO 48-4 D 84,7
Solid Density DIN EN ISO 1183-1 ρ 1.18 g/cm³
Tensile properties  
Tensile Modulus ASTM D638, Type I Et 2101 MPa
Tensile Strength ASTM D638, Type I σM 40.7 MPa
Elongation at Tensile Strength ASTM D638, Type I εM 3,45 %
Elongation at Break ASTM D638, Type I εtB 3,54 %
Bending properties  
Flexural Modulus ASTM D790 Ef 2735 MPa
Flexural Strength ASTM D790 σfM 99.3 MPa
Deflection at Flexural Strength ASTM D790 εfM 4,90 %
Deflection at Break ASTM D790 εfB > 5.0 %
Impact Strength Properties  
IZOD Notched ASTM D256 aiN 1.58 kJ/m²/(16 J/m)
Thermal Properties  
HDT @ 0.45 N/mm² ASTM D 648 (B) Tf 66.3 °C
Glow wire flammability index DIN EN 60695-2-12 GWFI 625 °C / 2.9 mm
Glass Transition Temperature DIN EN ISO 11359 Tg 49
Linear Expansion Coeff.  -20°C … 20°C DIN EN ISO 11359 α 92 * 10-6 K-1
Linear Expansion Coeff.  65°C … 80°C DIN EN ISO 11359 α 205 * 10-6 K-1
Curl / Vertical Distortion  
Dimensional Accuracy XY Test Print (100x100x6mm) 99,81%
Curl on Test bar (200x20x5mm) Vertical Print Orientation 0mm
Curl on Cantilever Test bar (200x20x5mm) Horizontal Print Orientation 1.0 mm
Printing Speed  
Print Speed (cm³/hour) 1897
Conditions: Printed on Solidator V3, Layer Height 100 micron, Cleaned in Isopropanol < 3 min, Air Brush Clean, Post Cure with Solidator Cure Box